Aerospace Cycling

All answers for Motorcycle

Archives

Categories

Quick Answer: What Do Exhaust Baffles Do

An exhaust baffle is an acoustically tuned metallic chamber placed inside a motor vehicle’s muffler to cancel out, or muffle, the sound from the vehicle’s exhaust outlet.

Are exhaust baffles bad?

Removing baffles from a motorcycle exhaust or muffler will not damage its engine. Doing so will only make your engine sound louder and reduce restriction in your motorcycle exhaust (back pressure). Removing baffles only requires you to work with the end portion of your motorcycle exhaust – AKA “end can”.

Will removing the baffles hurt my motorcycle?

You will potentially lose a little low to midrange power and gain some power at the high end. Usually, removing the baffles on a motorcycle can lean out the air-to-fuel mixtures, so you will have to tune up your engine. A leaner mixture burns hotter and can lead to increased engine temperatures.

How does baffle size affect sound?

Generally speaking, bigger baffles produce louder motorcycle sound. This is because bigger baffles are much more hollow and they allow sound waves to go through without much disturbance.

What do baffles do on a motorcycle?

Exhaust baffles are metallic chamber parts that are acoustically tuned and fit onto the exhaust pipe’s muffler. They function to cancel out or muffle the loud noise created from the exhaust pipe. Most motorcycles come with a standard baffle or muffler required by law to reduce the engine’s natural noise levels.

Will running straight pipes hurt my motorcycle engine?

Will Straight Pipe Ruin Your Motorcycle Engine? Straight pipe will not ruin your motorcycle engine. The motorcycle engine is not exposed by a straight pipe and does not get impacted enough to the point that it will break or burn.

Do you have to retune after removing baffles?

Registered. Removing your baffles will likely require a retunethat really messes with the back pressure. If you listen to some other mufflers and inquire as to the manufacturer of some that you like, you’re more likely to better match the backpressure your present pipes have and not hurt your tune as much.

Does removing exhaust baffles affect performance?

Removing the baffles will change how the engine runs. It will usually cause the engine to run leaner (less fuel), and a lean mixture burns much hotter that can cause damage. Removing the baffles will also mess up the power curve of the motor.

How can I make my motorcycle sound better?

How To Make Your Motorcycle Exhaust Sound Deeper Replace or Modify the Stock Muffler. Stock mufflers suit a wide range of personalities and preferences. Remove the Baffles. Get a Full Performance Exhaust System. Shop Slip-On Mufflers at West End Motorsports.

Should I wrap my motorcycle baffles?

TLDR – Baffle wraps are cheap, easy to apply and will not ruin your engine or reduce performance. You should definitely wrap your motorcycle baffles if they are too loud. I recommend using fiberglass wraps – they are most effective in silencing your bike.

Do exhaust baffles work?

Sound works in exactly the same way when it hits a “wall,” or “baffle.” When soundwaves hit the baffle, some of them will form a counterwave that pushes back against the incoming soundwaves. This won’t entirely cancel the sound out, but it will reduce it by bouncing some back.

Is a baffle the same as a muffler?

An exhaust baffle is an acoustically tuned metallic chamber placed inside a motor vehicle’s muffler to cancel out, or muffle, the sound from the vehicle’s exhaust outlet. They are used in almost all vehicles, from cars to motorcycles and even trucks.

Why does my muffler rattle when I accelerate?

What Causes a Muffler to Rattle? A loose bracket, rubber hanger or connector, or one that is badly corroded, can allow a muffler to rattle as the exhaust pipe bangs against another part of your vehicle when you accelerate or drive on bumpy roads, or even when you first start the car and it’s stationary and idling.

Can I remove baffles from my stock exhaust?

The baffles are located in the pipes of the exhaust system of your Harley and can be removed without damaging the bike. You can take your bike to an authorized Harley Davidson shop to have this done, but the cost will be much higher than doing it yourself using tools that you likely have on hand.

Is it bad for a motorcycle to backfire?

A motorcycle backfire is inherently bad since unburnt fuel is detonating in a mistimed manner. The loss of fuel results in loss of power and low mileage for the motorcycle. In addition, the fuel detonation causes overheating of the engine and the exhaust.

Are Motogp bikes straight piped?

MOTOGP= straight pipes, 19,000rpm limit, no sound regulations, WSBK= production engines, packed pipes, sound regulations.

Is straight piping legal?

Yes, as above, they are illegal. Not because of noise, but because you are changing the exhaust from the factory configuration. If the car had 4 mufflers from factory, it must have the same number in any aftermarket exhaust.

Do slip ons require remap?

Remapping is required if you want the most performance and smoothest power delivery from your bike. Again it doesn’t matter if you run a stock exhaust or a slip on. If you want you can always richen up the A/F and gain a couple of horsepower.

What is a remap on a Harley Davidson?

A “remap” is when you use some type of external software to alter the onboard “computer” (ECU). And Shute is right, if you’re gonna add a free flowing air filter combined with a more open exhaust, you may need to get some type of fuel management system (PCIII, TTS, etc).

Does removing the baffle increase power?

Removing the baffles will change how the engine runs. It will usually cause the engine to run leaner (less fuel), and a lean mixture burns much hotter that can cause damage. Removing the baffles will also mess up the power curve of the motor.

Can you put baffles back in?

Considering the fact that you DON”T have the stock baffles. You can’t put them back.

Do slip on exhausts improve performance?

Slip-on mufflers won’t improve horsepower or performance. Slip-ons are mostly for decoration and noise enhancement. Installation on some bikes may require bodywork done by a professional at a shop.