Aerospace Cycling

All answers for Motorcycle



Quick Answer: What Do The Letters Mean On A Motorcycle Battery

The first letter generally identifies the manufacturer (Y = Yuasa, E= Exide, F= Fiamm ou Fulbat…). E.g. Meaning of the battery number “YTX7L-BS”: “YT”: Manufacturer reference. “X”: High performance battery. “7”: Battery performance indicator.

What do the numbers and letters on a battery mean?

The letter “N” is simply a spacing digit to separate the nominal voltage from the next number (14 in the example) which indicates the amp/hour capacity of the battery. The amp/hour capacity is determined by the physical size of the battery, the larger the battery is the larger its amp/hour capacity.

What do the codes on batteries mean?

The letters and numbers in the code indicate the number of cells, cell chemistry, shape, dimensions, the number of parallel paths in the assembled battery and any modifying letters deemed necessary. A multi-section battery (two or more voltages from the same package) will have a multi-section designation.

What does L stand for on a battery?

400–1,200 cycles. Nominal cell voltage. 3.6 / 3.7 / 3.8 / 3.85 V, LiFePO4 3.2 V. A lithium-ion battery or Li-ion battery is a type of rechargeable battery in which lithium ions move from the negative electrode through an electrolyte to the positive electrode during discharge, and back when charging.

How do you read a battery label?

Understanding the specifications 1st digit – Voltage. 1-2 = 6 Volt Battery. 5-7 = 12 Volt Battery. 2nd & 3rd digits – Nominal capacity. 560 = 60Ah @ 20 hour rate. 660 = 160Ah @ 20 hour rate. 4th & 5th digits – The unique code number referencing battery performance and features.

How do you read battery numbers?

Date Code: Most batteries have a date code, usually a long string of numbers and letters that show when the battery was purchased. One row of one- or two-letter codes indicates the month, the other row of numbers is the last digit of the year.

What does N70 battery mean?

N70. Type of rechargeable battery that supplies electric energy to an automobile. An automotive SLI battery(starting, lighting, and ignition) powers the starter motor, lights, and ignition system of a vehicle’s engine. Neuton Power.

What does SW mean on a battery?

In the IEC ‘standard’ battery designation convention, the low drain or normal version of the watch battery will end with the letter ‘W’, while the high drain version would end in ‘SW’. A common watch battery is the SR44W (or the SR44SW for the high drain version).

What is the normal voltage of a motorcycle battery?

Most of the motorcycle batteries are the conventional ‘lead-acid’ batteries. These batteries can be either of 6 volts or 12 volts. If the batteries are in good condition, then the actual value of voltages isn’t these values. When the battery is charged fully, and it’s at peak, the terminal voltage of each cell is 2.1V.

Which battery type is best for motorcycle?

Lithium batteries have real advantages, but you need a good reason to fit one. They generally offer plenty of cold cranking amps and are light-weight, ideal for more aggressive riding on and off road and where a minimum of electrical devices need power when the bike’s not running.

What size battery does a motorcycle use?

Most Popular Motorcycle and Powersports Battery Sizes Comparison Chart Battery Model YTX9-BS 10h Cap./CCA YTX14AH-BS 10h Cap./CCA Dimensions L x W x H (inch/mm) 5.875 x 3.4375 x 4.125 150 x 87 x 105 5.25 x 3.5 x 6.5625 134 x 89 x 166 Chrome YTX9-BS 6/180 YTX14AH-BS 12/210 Deka ETX-9 8/120 – EverLast CTX9-BS 8/135 CTX14AHL-BS 12/190.

What does BS stand for battery?

The two letters after the hyphen signify the type of the battery, as in whether it is conventional or sealed. The BS means Battery Sealed. A sealed battery is one that’s filled with acid and sealed after filling. It can be used in any orientation and is offers easier maintenance.

What does RC mean on a battery?

Reserve capacity (RC) – helps to power your vehicle’s electrical system if the alternator fails. It identifies how many minutes the battery can supply ample power without falling below the minimum voltage needed to run your vehicle.

What does CCA and MCA mean on a battery?

CCA vs. MCA: The two common power measurements are CCA (Cold Cranking Amps, the number of amps a battery can deliver for 30 seconds at 0°F while maintaining its voltage above 7.2 volts) and MCA (Marine Cranking Amps, similar but measured at 32°F instead of 0°F).

What should a 12 volt battery read when fully charged?

Fully charged automotive batteries should measure at 12.6 volts or above. When the engine is running, this measurement should be 13.7 to 14.7 volts.

What should a 6 volt battery read when fully charged?

A 6V battery is actually fully charged when it reads slightly over 6V on a multimeter. A 6 volt charger is typically designed to produce about 7 volts so that it can attain a full charge.

How do I know what type of battery I have?

The manufacturer’s information and the name or number of their model are usually embossed on the case or placed on the label. Second method: You have to look at the top of the battery. Usually, batteries have removable tops or caps unless you find “sealed” written on the label if they are liquid lead-acid type.

What battery rating is 32 degrees F?

Cranking amps are the numbers of amperes a lead-acid battery at 32 degrees F (0 degrees C) can deliver for 30 seconds and maintain at least 1.2 volts per cell (7.2 volts for a 12 volt battery).

Does a higher Ah battery give more power?

In general, higher amp hours mean more runtime and higher voltage means more power.

How many plates is N70 battery?


What voltage is too low for a 12 volt battery?

The lifespan of your battery will be moderately affected if it remains within this voltage range for extended periods of time. 12.0 volts or below – At 12.0 volts your battery is considered to be fully discharged or ‘flat’ and should be recharged as soon as possible.

What voltage should a 12V AGM battery be?

Voltage on a fully charged battery will read 2.12 to 2.15 volts per cell, or 12.7 volts for a 12 volt battery. At 50% the reading will be 2.03 VPC (Volts Per Cell), and at 0% will be 1.75 VPC or less. Specific gravity will be about 1.265 for a fully charged cell, and 1.13 or less for a totally discharged cell.