The letter is the speed rating, or the maximum speed the tire is built for. As an example, a tire rated 90R could safely carry 1,323 pounds and travel at 106 mph. Consult a load and speed index to find out what your tire’s specific rating means.
What does the T or H mean on tires?
The “T” or “H” on tires pertain to their speed ratings. A T-rated tire can withstand top speeds of up to 118 mph (190 km/h), while an H-rated tire can support up to 130 mph (210 km/h).
What does the letter D mean on tires?
The D indicates that the tire is a diagonal bias ply construction and the R indicates that the tire is a radial tire construction. Beyond the size and type, there are load ranges for tires. Most trailer tires are load range B, C or D.
Can I use H-rated tires instead of V?
The rating is the speed the tire has been tested to for continuous safe driving. The English equivalent speed for H-rated tires is 130 mph and V-rated tires are good for up to 149 mph.
Which speed rating is better H or T?
The T or H part of the code indicates the speed rating of the tires. A speed rating of T indicates that the tire can be safely driven up to 118 mph. A tire with an H rating has a higher limit — 130 mph — which means it can be safely driven faster than the tire with the 94T code.
What is load range H?
From a G to an H Truck tires typically come in two load ratings: G and H. Load range G is a 14-ply configuration, while load range H tires have 16 plies. The heavier-rated tire will usually add between 700 pounds and 1,000 pounds more load-bearing capacity per tire (see “How Much is Too Much,” next page).
Which is better D or R tires?
The difference between the two trailer tire sizes is that the letter D in the first size you listed ST205/75D15 stands for bias ply and the letter R in the tire size that they put on your vehicle stands for radial. A tire that runs cooler will last longer.
What does R and D mean on tires?
R indicates a radial tire — D indicates a Bias ply tire D is for diagonal. The sidewalls will flex differently. The radial tire should run a little cooler . Also a radial tire the same size as a bias ply tire should have a larger contact area where the tire meets the pavement because of the design .
What’s the difference between R15 and D15?
The R15 is a Radial tire and the D15 is a Bias Ply tire. These tires are usually a harder rubber and can carry more weight but not necessarily a smoother ride.
What speed rating is S?
TIRE SPEED RATINGS SAFETY Speed Rating Maximum Speed Q Up to 100 mph R Up to 106 mph S Up to 112 mph T Up to 118 mph.
Is it OK to have tires with different speed ratings?
Just remember, never mix and match tires with different speed ratings on your vehicle. This will cause major problems with the handling of your vehicle. Vehicle handling may be affected, and the vehicle’s speed capacity is now limited to the lowest speed-rated tire.
What does M’s mean on a tire?
149. All-Season Tires with Mud and Snow Designation. When a tire has M+S on it, that means that it meets the Rubber Manufacturers Association (RMA) guidelines for a mud and snow tire.
What does 100T mean on a tire?
Just after the tire size are some more numbers, commonly 100T. The 100 is the tire’s load index, and in the case of 100, it means by itself a properly inflated tire can hold up 800 kilograms (1,764 lb.).
What happens if you go over tire speed rating?
The speed rating is there to let you know that you shouldn’t exceed that speed with that tire. If you do for a sustained period of time the air in the tire will heat up and expand causing the tire to explode.
What does Utqg mean on tires?
No, “UTQG” is not a play dictated by Peyton Manning during a Super Bowl huddle. The Uniform Tire Quality Grade is a comparative assessment applied to most car tires (excluding winter tires) to help consumers make informed decisions. The manufacturers grade the tires themselves for temperature, traction, and tread wear.
What load range is F?
Light Truck Tire Load Ranges Abbreviation Meaning Max Load Pressure LR/C Load Range C – 6 ply rated 50 psi LR/D Load Range D – 8 ply rated 65 psi LR/E Load Range E – 10 ply rated 80 psi LR/F Load Range F – 12 ply rated 95 psi.
What’s better load range D or E?
For a given brand and size tire, the load range E has a higher maximum load capacity than the load range D. The E tire is built and rated for 80 psig, while the D tire is (as I recall) built and rated for 65 psig maximum inflation pressure.
What ply rating is G?
14 Ply Rating Load Range 10 E 12 F 14 G 16 H.
Can you mix D and R tires?
Expert Reply: It’s fine to use a radial-type tire as a spare (a tire with “r” in its size code) with a trailer that has Bias ply “d” tires but for a short distance in the event of a flat tire. But mixing tires is not recommended for everyday use because their internal construction is different.
What is the average mileage for new tires?
Zielinski said that, if you’re kind to your tires—that is, you aren’t constantly peeling out at stoplights and you properly maintain them—most new tires on the market today will last about 60,000 miles.
Which TYRE is best radial or bias?
Radial tires dissipate heat better than bias-ply tires, which allows them to travel at higher speeds for greater distance. “Due to a rigid tread, single steel body ply construction and the absence of multiple nylon plies, radials are much more effective at reducing heat,” says Mills.
What is Load Range C?
For example, a “C” load range indicates that a tire is equivalent to a 6-ply construction tire. However, you may find these tires marked as Standard Load (SL) or Extra Load (XL or Reinforced). Both have a 4-ply rating, but the Extra Load can support additional load at up to 42 PSI while the Standard Load is 36 PSI.